GDC Depth Measuring Gauge 1.2 mm PCP1301
Features
Description
Depth Measuring Gauge 1.2mm GDC PCP1301
Used for general-purpose measurements, both in the clinic or for other purposes, to establish an accurate measurement, e.g., internal and external diameter, length, depth or thickness. Instrument to measure the depth of bony tunnel.
They are manufactured from selective stainless steel by skilled
workers with modern machines, keeping control on production and quality at every step to guarantee a supply of Instruments
with utmost precision.
Packaging
Direction of use
MAINTENANCE INSTRUCTIONS:
Must clean after every use with warm water to remove blood, tissues, and mucus from the instruments
Ultrasonic cleaning is recommended for all the instruments specially articulated instruments such as forceps, rongeurs, etc
Use only standard and reputed brands of disinfectant solutions.
STERILIZATION:
We recommend that the temperature does not exceed 120C
Dry heat sterilization see that temperature does not exceed 180C and there should be no long exposure as this would cause discoloration,
loss of temper and this, in turn, would disturb the hardening of the instrument
Do not use substandard chemicals or disinfectants as they can damage the instruments
Avoid the use of unsuitable highly acidic chlorine-containing agents
Use Demineralized water only
Never rub an instrument with a metal brush at the time of cleaning.
FAQs
Is MTA Applicator sterilizable?
Yes and it must be sterilized in dry heat or autoclave.
To avoid clogging, the applicator must be sterilized with its parts disconnected.
Warranty
- 6 Months warranty against Rust
