Coltene Diatech Crown Preparation Kit

Features

High-quality diamond burs.
Autoclavable at 134C
Premium packaging
Friction grip shank configuration

Description
Diatech Crown Preparation Bur kit is designed to offer speedy, simple, and accurate tooth preparation for a wide range of crown and bridge restorations, veneers, and Onlays.
An excellent marginal fit is key to restoration longevity and success. Excellent fit requires good marginal preparation. Restorations fail at the margins more than anywhere else, leading to adhesive failure of the bond or cement wash-out, leakage and pulp symptoms. This kit provides a comprehensive selection of burs that are needed for crown preparations.
Crown Preparation Dental Burs Kit of 14 Multilayered Gold Plated Diamond Burs specially selectedfor Crown & Bridge Preparation.

Key Specifications
Shank type -Friction grip
Material -Stainless steel Shank Coated with diamond particles
Autoclavable upto 134?C
Color band on shank :

Regular -Blue
Fine - Red
Superfine -Yellow

Set Of 14 Burs :

368-023-5ML
811-033-5ML
830L-020-5ML
834-016-6.8ML
836R-014-6ML
847-014-8ML
847-016-8ML
856-014-8ML
859-010-10ML
898-016-11ML
847-016-8F
848-014-10F
830L-014-5XF
6052-018-8MLX

Packaging
Kit of 14 Burs:

1 x 368-023-5ML
1 x 811-033-5ML
1 x 830L-020-5ML
1 x 834-016-6.8ML
1 x 836R-014-6ML
1 x 847-014-8ML
1 x 847-016-8ML
1 x 856-014-8ML
1 x 859-010-10ML
1 x 898-016-11ML
1 x 847-016-8F
1 x 848-014-10F
1 x 830L-014-5XF
1 x 6052-018-8MLX

Direction of use

Insert the instrument as deeply as possible into the chuck (Friction Grip).
Set the handpiece at the required working speed before applying the instrument to the treated area.
Apply a maximum operating force of 0.4 [N] and do not exceed a speed of 230'000 [rpm].
Activate water spray during the entire treatment (minimum 50 mL/min).
Regulate water flow in case of water excess or shortage.
It is recommended to use a dental dam.
Use the instruments over the entire length of their working part and not just at the tip, so as to avoid an unconscious increase of the contact pressure causing local overheating.
Once the preparation has been completed, remove the instrument from the site and allow it to come to a standstill.
It is recommended to wear gloves and safety glasses.