DentGist NanoCom Composite Kit
Features
Description
DentGist Composite Kit is a visible light cured, radiopaque highly filled composite restorative material for anterior and posterior restorations of all teeth.The Composite Kit has 4 packable composite syringes and one bonding agent with 2g etching gel.
Indications:
Nano-Hybrid Universal Restorative is indicated for direct filling of class I, II, III, IV and V Cavities in anterior and posterior teeth. Preventive resin restoration and repair of composite / ceramic veneers.
Key Specifications
Composition of nano-hybrid composite :
- Bisphenol A Glycidyl Methacrylate,
- Bisphenol A Diethoxy Methacrylate,
- Urethane Dimethacrylate,
- Triethylene Glycol Dimethacrylate,
- Silanated Barium Glass Powder,
- Amorphous Fumed Silica
Composition of bonding agent :
- Urethane Dimethacrylate,
- Triethylene Glycol Dimethacrylate,
- Bisphenol A Diglycidyl Methacrylate,
- 2-HydroxyEthyl Methacrylate,
- Tertiary Butanol,
- Photoinitiators,
- Stabilizer
Composition of etchant : 37% phosphoric acid gel
Shelf Life : 3 years from the date of manufacturing.
Packaging
Direction of use
- Isolation : Rubber dam is the preferred method of isolation
- Cavity preparation : Prepare cavity with minimal tooth reduction. Bevel cavo surface enamel margins.
- Apply Etchant Gel to enamel and dentin surfaces for 15 seconds. Rinse thoroughly for 15 seconds with water
- Dry with clean, oil-free, air without desiccating the dentin
- Do not allow etched surface to become contaminated with saliva or blood during the bonding procedure
- Adhesive : Immediately after blotting, apply 2-3 consecutive coats of adhesive to etched enamel and dentin for 15 seconds with gentle agitation using a fully saturated applicator. Remove excess solvent by gently drying with dry air for at least 5 sec to ensure uniform glossy surface. Light cure for 20-30 seconds
- Remove composite syringe cap and dispense material onto a mixing pad
- Place the material into the cavity using a suitable placement instrument.
- After dispensing, screw plunger should be rotated anticlockwise by half to full turn to release residual pressure inside the syringe
- Contour the material in the cavity.
- Light cure for 40 sec using standard curing light.
- When necessary build in increments of 2mm maximum using a layering technique.
- Shape and polish with a Polishing system using standard technique.
FAQs
Q. What is nano hybrid composite?
A. A resin composite with unique nanofiller technology. Formulated with nanocluster filler particles, the composite is purposed to combine the strength of a hybrid and the polish of a microfil. Nano-Hybrid Composite creates anterior and posterior restorations that are long lasting, abrasion resistant and esthetically pleasing. It combines the durability necessary for posterior composite restorations with the polishability that is required for anterior esthetic results.
Q. How many shades are present in this NanoCom Composite Kit?
A. It consists of 4 Shades (A1, A2, A2, A3)