GC Miracle Mix Capsules, Box Of 50

Features
Strong direct bond - No undercuts, fewer pins; Will not chip or flake when trimmed or cut
Simple technique - 4 minutes set to finish
High fluoride release - Reduces secondary decay
Will not stain or discolor surrounding teeth
Easily distinguishable from the tooth structure
Shrinks and expands like the tooth structure
"No-mess" capsules or powder-liquid

Description


Miracle Mix is a triple-cured, resin reinforced glass ionomer crown and core build-up material. This material is well suited for use as a base under composite resin and amalgam, or as a temporary restorative.

Indications

Core build-up
Restoration of primary teeth 
Cases where radiopacity is required 
As a base or liner.
Class I, limited Class II, temporary fillings, etc.



Key Specifications

Store at temperature of 4-25 C (39.2-77.0 F).

Packaging
Miracle Mix Powder & Liquid

1 x 15g Powder
1 x 17g Alloy
1 x 8ml Liquid

Miracle Mix Capsules, Box Of 50

50 Miracle Mix Capsules (0.10ml mixed volume/capsule)

Direction to Use
1. POWDER AND LIQUID DISPENSING 

Pour the Miracle Mix alloy into the bottle of Miracle Mix powder and shake thoroughly.
The recommended powder to liquid ratio is 2 or 3 level scoops of powder to 2 drops of liquid.
For accurate dispensing of powder, lightly tap the bottle against the hand. Do not shake or invert.
Hold the liquid bottle vertically and squeeze gently.
Close bottles immediately after use.
Shake the powder bottle occasionally.

2. MIXING

Dispense powder and liquid onto pad or glass slab. Divide the powder into 2 equal parts. Mix the first portion with all of liquid for 15-20 seconds. Incorporate the remaining portion and mix the whole thoroughly for 20 seconds.

Note : A heavy consistency is recommended.
3. RESTORATIVE TECHNIQUE 

Prepare tooth using standard techniques. Extensive mechanical retention is not necessary. For pulp capping, use calcium hydroxide.
Wash and dry but DO NOT DESICCATE. GC CAVITY CONDITIONER or GC DENTIN CONDITIONER is recommended to remove the smear layer.
Mix the required amount of cement. Working time is 1 min. 30 seconds at 23 C (73.4 F). Higher temperatures will shorten working time.
Remove surface moisture but DO NOT DESICCATE.
Transfer cement to the preparation using a syringe or suitable placement instrument. Avoid air bubbles.
Form the contour.
Setting time is 5?00" to 5?30" from start of mixing.

4. FINISHING 

Use standard techniques