Voco Ionofil Plus Refill Liquid 10ml

Description
Glass ionomer filling cement with new glass technology.
Advantages:-

Spreadable consistency
Good marginal adaptation
Good translucency
Improved glass ionomer technology
Good aesthetics

Indications:-

Restoration of V-shaped defects and cervical enamel erosions
Linings
Restoration of deciduous teeth
Treatment of carious lesions
Class III fillings

Key Specifications

Store at temperatures of 4  C to 23  C.
Tightly close powder and liquid container immediately after use.

Packaging
 Ionofil Plus Refill Liquid 10ml:

1 x 10ml Bottle.

Ionofil Plus Refill Powder 15g:

1 x 15g Bottle
Direction to Use

Place powder and liquid on a glass plate or a suitable mixing pad and work the powder into the liquid a little at a time to begin with, then in larger quantities.
Use 1 drop of liquid for 1 level measuring scoop of powder (mixing ratio: 4.7 - 5.6 g of powder : 1 g of liquid).
When dispensing the liquid, hold the dropper bottle absolutely vertically.
A strong plastic spatula should be used for mixing.
The mixing time is 30 - 40 s (it should not exceed 1 min).
The working time after mixing is approximately 2 - 3 min (the temperature should be 15  C - 23  C).
After insertion of the material into the cavity, the setting time is approximately 2.5 min.
During the filling procedure make sure that the working area is kept dry.
Class V cavities should be at least 1 mm deep.
Avoid feather-shaped margins.
In case of doubt prepare in a conventional way.
During the setting phase, especially immediately after application, glass ionomer cements are sensitive to humidity (breath, saliva) and also to drying-out. Therefore, if possible, apply a protective varnish immediately.
After setting of Ionofil Plus, but no sooner than 5 - 6 min after application (depending on mixing temperature and mixing ratio) excess material may be removed with a sharp instrument and contouring can be carried out (flexible disks).
Then cover again with varnish.
The best results for final polishing can be obtained about 24 h after the filling has been inserted.