Voco Ionoseal Refill Syringe 1 x 2.5g

Features
Ready-for-use one-component material
Time-saving: light-curing in seconds
Quick and hygienic application
High compressive strength (226 MPa)
Fluoride release against secondary caries
High biocompatibility
Radiopaque

Description
Ionoseal :
Light-curing ready-for-use glass ionomer composite cement
INDICATIONS:

Lining under all types of filling material
Extended fissure sealing
Restoration of smaller lesions

Key Specifications

Store Ionoseal tightly closed and light-protected at room temperatures between 4  C - 23  C.
Refrigeration prolongs the shelf life.
Prior to application, the material must reach room temperature again.

Packaging
Ionoseal Refill Syringe 1 x 2.5g:

1 x 2.5g Syringe

Ionoseal Refill Syringe 3 x 2.5g:

3 x 2.5g Syringes
Direction to Use

Prepare the cavity according to the rules of the filling technique. The tooth surface should be fully dried. Avoid contamination.
Cover areas in proximity of the pulp with a calcium hydroxide preparation. It is recommended to provide an adhesive bond (especially in cavities that do not have enamel on all sides).
Ionoseal tube/syringe: Apply the required quantity of Ionoseal directly from the tube onto the instrument or apply directly from the syringe. Avoid contamination and disinfect after use. For linings in excess of 1 mm thickness, apply and cure in layers. In order to ensure the function of the nondripping syringe do not pull back the plunger during or after use.
To light-cure this material, conventional polymerisation devices are suited. The light output should be a minimum of 500 mW/cm2 for halogen polymerisation devices and 300 mW/cm2 for LED devices. Light source should be positioned as close as possible to the surface (approx. 2 mm). Cure for at least 20 s. For a greater distance, prolong curing time.
Finish the Ionoseal surface with a rotary instrument and place the filling.